European Commission logo
Research and Innovation
Online Data & Information Network for Energy (ODIN)
ODIN:

You need to Login to access this option.

The Open Access module only allows you access to a limited subset of the data that ODIN hosts. To access the full set of features you need to (register and) login.

Report

Most frequently viewed DOIs

Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.001 mN (twelfth nominally repeat test) (doi:10.5290/1200155 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.004 mN (twenty-ninth nominally repeat test) (doi:10.5290/1200157 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.001 mN (thirteenth nominally repeat test) (doi:10.5290/1200160 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.003 mN (sixty-third nominally repeat test) (doi:10.5290/1200161 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.003 mN (sixty-sixth nominally repeat test) (doi:10.5290/1200165 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.003 mN (sixty-seventh nominally repeat test) (doi:10.5290/1200166 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.003 mN (sixty-eighth nominally repeat test) (doi:10.5290/1200169 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.004 mN (thirty-first nominally repeat test) (doi:10.5290/1200172 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.004 mN (thirty-second nominally repeat test) (doi:10.5290/1200174 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.003 mN (seventy-first nominally repeat test) (doi:10.5290/1200177 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2 mN (third nominally repeat test) (doi:10.5290/1200178 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.004 mN (thirty-fourth nominally repeat test) (doi:10.5290/1200181 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.002 mN (forty-ninth nominally repeat test) (doi:10.5290/1200184 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.004 mN (forty-fourth nominally repeat test) (doi:10.5290/1200206 )
Nanoindentation (single cycle) test data for Model Alloy (Fe-9Cr) material at 23 °C and maximum indenter force of 2.003 mN (eightieth nominally repeat test) (doi:10.5290/1200207 )
General Corrosion test data for ER 316L sa wm - sj material at 480 °C (specimen identifier 30119) (doi:10.5290/4860115 )
General Corrosion test data for ER 316L sa wm - sj material at 480 °C (specimen identifier 28919) (doi:10.5290/4860116 )
General Corrosion test data for ER 316L sa wm - sj material at 480 °C (specimen identifier 29219) (doi:10.5290/4860117 )
Uniaxial tensile test data for AISI 316 L(N) IG material at 288 °C (twenty-seventh nominally repeat test) (doi:10.5290/3720002 )
Uniaxial tensile test data for AISI 316 L(N) IG material at 288 °C (twenty-eighth nominally repeat test) (doi:10.5290/3720003 )
Uniaxial tensile test data for AISI 316 L(N) IG material at 288 °C (twenty-ninth nominally repeat test) (doi:10.5290/3720004 )


Extend your session

Due to prolonged inactivity, your session will expire in 5 minutes. To extend the session by another half hour, please click Ok.

Ok