| 1 |
Catalog of JRC Open Access general corrosion test data created during the SCWR-FQT project |
European Commission JRC |
Austin, T |
|
| 2 |
MatDB catalog of small punch tensile/fracture test data for P91 material |
European Commission JRC |
Matthias Bruchhausen |
|
| 3 |
MatDB catalog of uniaxial tensile test data for P91 material |
European Commission JRC |
Matthias Bruchhausen |
|
| 4 |
MatDB catalog of small punch tensile/fracture test data with two punch diameters |
European Commission JRC |
Matthias Bruchhausen |
|
| 6 |
Uniaxial tensile data for P91 in the temperature range 20°C to 600°C |
European Commission JRC |
Stefan Holmström |
|
| 8 |
Uniaxial creep data for P91 in the temperature range 375°C to 600°C |
European Commission JRC |
Stefan Holmström |
|
| 9 |
MatDB catalog of small punch tensile/fracture data from tests performed between room temperature and 650 ºC, |
European Commission JRC |
Matthias Bruchhausen |
|
| 11 |
Small punch test data for S355J2+N steel with 2.5 mm ball diameter |
European Commission JRC |
Matthias Bruchhausen |
|
| 12 |
Small punch test data for S355J2+N steel with 2 mm ball diameter |
European Commission JRC |
Matthias Bruchhausen |
|
| 13 |
Small punch test data for steel S355J2+N |
European Commission JRC |
Matthias Bruchhausen |
|
| 14 |
Small punch test data for Zircaloy 4 and 15 15 Ti on tube specimens cut from nuclear fuel cladding tubes. The data were acquired in the framework of the EERA JPNM pilot project TASTE. |
European Commission JRC |
Matthias Bruchhausen |
|
| 16 |
Small punch and small punch creep data on P92 steel |
European Commission JRC |
Matthias Bruchhausen |
|
| 17 |
Small punch test data for Gr. 91 steel |
European Commission JRC |
Matthias Bruchhausen |
|
| 18 |
Small punch creep data created for P91 |
European Commission JRC |
Matthias Bruchhausen |
|
| 19 |
Uniaxial creep test data for P91 steel. |
European Commission JRC |
Matthias Bruchhausen |
|
| 20 |
Small punch tensile test data on Gr. 91 steel at room temperature and elevated temperature. |
European Commission JRC |
Matthias Bruchhausen |
|
| 22 |
EU - MATISSE as a catalog with version numbers |
Terma |
Allister Smith |
|
| 23 |
Catalog of JRC Open Access uniaxial tensile and impact test data created during the NESC IV project |
European Commission JRC |
Austin, T |
|
| 24 |
SP tests on P92 (T70175) at RT |
HZDR |
Houska, M; Altstadt, E |
|
| 25 |
Uniaxial tensile test data for AISI 316L in PWR conditions at 340°C |
European Commission JRC |
Novotny, R; Timke, T; Martin, O |
|
| 26 |
Catalog of SSRT data sets created at CVR during the KAMILE project on crack initiation in liquid metal embrittlement |
European Commission JRC |
Di Gabriele, F; Austin, T |
|
| 27 |
Small Punch tests on 24%CW 1515Ti (curved samples) RT-800°C. |
European Commission JRC |
Holmström, S |
|
| 28 |
Uniaxial tensile tests at room temperature on 24%CW 1515Ti |
Helmholtz-Zentrum Dresden-Rossendorf (HZDR) |
Altstadt, E; Houska, M |
|
| 29 |
Uniaxial tensile tests at room temperature on 46%CW 1515Ti |
Helmholtz-Zentrum Dresden-Rossendorf (HZDR) |
Altstadt, E; Houska, M |
|
| 30 |
Small Punch tests on Zircaloy 4 (curved samples) RT-400°C |
European Commission JRC |
Holmström, S |
|
| 31 |
Micro-compression tests of 316L pillars |
European Commission JRC |
Ruiz, AM; Simonovski, I |
|
| 32 |
Small Punch tests on CEA CW 1515Ti (curved samples) RT-800°C. |
European Commission JRC |
Holmström, S |
|
| 33 |
Small Punch tests on 24%CW 1515Ti (curved samples) at RT |
European Commission JRC |
Holmström, S |
|
| 35 |
Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 1 mN |
European Commission JRC |
Ruiz, A |
|
| 36 |
Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 10 mN |
European Commission JRC |
Ruiz, A |
|
| 37 |
Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 100 mN |
European Commission JRC |
Ruiz, A |
|
| 38 |
Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 5 mN |
European Commission JRC |
Ruiz, A |
|
| 39 |
Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 50 mN |
European Commission JRC |
Ruiz, A |
|
| 40 |
Catalog of JRC Open Access uniaxial creep and small punch test data for the same P91 material used in the INTEGRITY FP5 Growth project |
European Commission JRC |
Austin, T |
|
| 41 |
MatDB catalog of uniaxial tensile test data for P92 steel |
European Commission JRC |
Holmström, S |
|
| 42 |
Catalog of JRC Open Access uniaxial creep and small punch test data for a low alloy - 2¼Cr 1Mo V modified ferritic steel. |
European Commission JRC |
Austin, T |
|
| 43 |
Catalog of JRC Open Access uniaxial tensile test data for an AISI 316 L stainless steel. |
European Commission JRC |
Austin, T |
|
| 44 |
Small Punch tests (2.5 mm ball diam.) on 24%CW 1515Ti (curved samples) RT-800°C |
European Commission JRC |
Holmström, S |
|
| 45 |
Environmentally Assisted Fatigue Data from the INCEFA-PLUS PROJECT (January 2019) |
European Commission JRC |
Bruchhausen, M |
|
| 46 |
Small Punch tests (2.5 mm ball diam.) on 46%CW 1515Ti (curved samples) RT-800°C |
European Commission JRC |
Holmström, S |
|
| 47 |
INCEFA+ phase I test data |
European Commission JRC |
Bruchhausen, M |
|
| 48 |
Mitsubishi Heavy Industries (MHI) strain-controlled low cycle fatigue test data for AISI 304 stainless steel |
European Commission JRC |
Austin, T |
|
| 49 |
Catalog of LCF data sets created at the JRC during the H2020 INCEFA-PLUS project |
European Commission JRC |
Novotny, R. |
|
| 50 |
Collection of fatigue data from the INCEFA+ project. |
European Commission JRC |
Bruchhausen, M |
|
| 51 |
CEN/WS NATEDA nanoindentation test data |
European Commission JRC |
Ruiz Moreno, A.M.; De Luca, F.; Austin, T. |
|
| 53 |
Catalog of PWR and AIR environment fatigue tests performed at SCK CEN in the framework of the H2020 INCEFA-PLUS project. |
SCK CEN |
Vankeerberghen, M. |
|
| 54 |
MICRIN and MICRIN+ data for SSRT tests on Alloy 182 Ni-based alloy and A078 high-Si stainless steel |
PSI - Paul Scherrer Institute |
Ritter, S. |
|
| 55 |
Database of H2020 M4F nanoindentation test data |
European Commission JRC |
Austin, T |
|
| 56 |
Datasets from the INCEFA-PLUS project used for assessing the effects of mean stress effect in strain controlled fatigue tests. |
Paul Scherrer Institute |
Spätig, P |
|
| 57 |
Fatigue data from the INCEFA+ main programme |
European Commission JRC |
Bruchhausen, M |
|
| 58 |
Fatigue data from the INCEFA+ low Fen programme |
European Commission JRC |
Bruchhausen, M |
|
| 59 |
Fatigue data from the INCEFA+ programme on hold-time effects |
European Commission JRC |
Bruchhausen, M |
|
| 60 |
Catalog of JRC and NCBJ nanoindentation test results from the H2020 M4F project |
European Commission JRC |
Austin, T |
|
| 61 |
Catalog of MEACTOS and MICRIN+ CERT test results for environmentally-assisted crack initiation of Alloy 182 in PWR 340°C and BWR/NWC |
SCK CEN |
M. Vankeerberghen et al. |
|
| 62 |
Catalog of MEACTOS CERT test results for environmentally-assisted crack initiation of Alloy 182 in PWR 340°C and BWR/NWC |
SCK CEN |
M. Vankeeerberghen et al. |
|
| 63 |
MEACTOS environmentally-assisted crack initiation data for constant extension rate tensile tests in BWR/NWC and PWR environments on Alloy 182 Ni-based alloy and cold-worked 316L stainless steel |
PSI - Paul Scherrer Institute |
Ritter, S. et al. |
|
| 64 |
MEACTOS environmentally-assisted crack initiation data for constant extension rate tensile tests in BWR/NWC and PWR environments on cold-worked 316L stainless steel |
PSI - Paul Scherrer Institute |
Ritter, S. et al. |
|
| 65 |
MEACTOS environmentally-assisted crack initiation data for constant extension rate tensile tests in BWR/NWC and PWR environments on Alloy 182 Ni-based alloy |
PSI - Paul Scherrer Institute |
Ritter, S. et al. |
|
| 66 |
MEACTOS environmentally-assisted crack initiation data for constant extension rate tensile tests in BWR/NWC environment on Alloy 182 Ni-based weld metal |
PSI - Paul Scherrer Institute |
Ritter, S. et al. |
|
| 67 |
MEACTOS environmentally-assisted crack initiation data for constant extension rate tensile tests in PWR environment on Alloy 182 Ni-based weld metal |
PSI - Paul Scherrer Institute |
Ritter, S. et al. |
|
| 68 |
MEACTOS environmentally-assisted crack initiation data for constant extension rate tensile tests in BWR/NWC environment on cold-worked 316L stainless steel |
PSI - Paul Scherrer Institute |
Ritter, S. et al. |
|
| 69 |
MEACTOS environmentally-assisted crack initiation data for constant extension rate tensile tests in PWR environment on cold-worked 316L stainless steel |
PSI - Paul Scherrer Institute |
Ritter, S. et al. |
|
| 70 |
International Fatigue Database in Support of Nuclear Energy Safety |
Jacobs |
McLennan A. |
|
| 71 |
POEAM Round-Robin environmentally-assisted crack initiation data for constant extension rate tensile tests in LWR environments on additively manufactured 316L stainless steel |
PSI - Paul Scherrer Institute |
Ritter, S.; Toivonen, A.; Depinoy, S.; Zajec, B.; Duff, J.; Sipilä, K. |
|
| 73 |
Catalog of data from the Open Access to JRC Research Infrastructures SPT-INVEST project |
European Commission JRC |
Austin, T. |
|
| 74 |
Catalog of data from the Open Access to JRC Research Infrastructures ENAFTIS project |
European Commission JRC |
Austin, T. |
|
| 75 |
Catalog of data from the Open Access to JRC Research Infrastructures SCS project |
European Commission JRC |
Austin, T. |
|
| 76 |
Small Punch Creep, 650C, NUCOBAM |
European Commission JRC |
Simonovski, I |
|
| 77 |
Uniaxial Creep, 650C, NUCOBAM |
European Commission JRC |
Simonovski, I |
|
| 78 |
Catalog of JRC Open Access thermo-mechanical fatigue test data from a multi-partner inter-laboratory study |
European Commission JRC |
Austin, T. |
|
| 79 |
PATRICIA - NRG PALLAS |
NRG PALLAS |
Nindiyasari, F. |
|
