Loading...
Test Data
Test/specimen identifier | test8_10mN |
Test standard | |
Quality remark | |
Reference to report | - |
Test machine | |
Test date (yyyy-mm-dd) | |
Data tested by | - |
Test remark | |
Temperature | 23 |
Ambient temperature | - |
Test control | Force Control |
Test control mode | - |
Loading rate | - |
Unloading rate | - |
Displacement rate (loading) | - |
Displacement rate (unloading) | - |
Indenter shape | Berkovich |
Indenter material | diamond |
Radius of spherical indenter r | - |
Maximum test force F(max) | 10.0323513445258 |
Time at F(max) t(hold) | - |
Indenter contact depth at F(max) h(c) | 302.722 |
Projected Area at h(c) A(p) | - |
Maximum indentation depth h(max) | - |
Permanent indentation depth h(p) | - |
Tangential indentation depth h(r) | - |
Calculation method | - |
Indentation hardness H(IT) | 4.019386 |
Test piece indentation modulus E(IT) | - |
Plane strain modulus E* | - |
Reduced plane strain modulus of the contact E(r) | 204.633 |
Indentation Creep C(IT) | - |
Indentation relaxation R(IT) | - |
Poisson's ratio nu(r) | - |
Elastic reverse deformation work W(elast) | - |
Total mechanical work W(total) | - |
W(elast) / W(total) eta(IT) | - |